Aluminum formwork advantages
The aluminum formwork is a building formwork made of 6061T6 or 6063T6 aluminum extrusion profile, also known as an aluminum alloy formwork.
Here are the advantage of aluminum formwork:
1.The short construction period:
The altunintun alloy building formwork system is a quick- disassembly system.The normal construction of a set of formwork can be completed one floor with in four or five days which greatly save the management cost of the contractor.
2.Reusable,low average cost of use:
Aluminum alloy building formwork system uses alminum alloy profiles by the extrusion process as raw inaterials (6063-T6 or 6061-T6),a set of formwork specifications can be used for over 300-500 tilnes, the average cost of use is low.
3.Convenient construction and high efficiency:
The aluminum alloy building formwork system is simple and convenient to assemble, with an average weight of 35KG/m2.
It is completely assembled by hand and does not require any assistance from mechanical equipment.The skilled installation workers can install 20-30 square meters per person per day.
4.Good stability and high bearing capacity:
All parts of the aluminum alloy building formwork system are assembled by aluminum extrusion profiles.After the system is assembled, an integral frame is formed. The stability is very good; the bearing cpacity can reach 6oKN per square meter.
After the system is assembled, an integral frame is fonned, the stability isverγ good; the bearing capacity can reach 6oKN per square meter.
5.Wide range of applications:
Aluminum alloy building Formwork are suitable for use in walls, horizontal floors, columns, bearns, stairs,window sills, etc.
6.Concrete surface effect after disassembly:
After the aluminum alloy building formwork is disassembled, the concrete surface quality is smooth, which basically meets the requirements of veneer and fair-faced concrete, and does not need to be surfaced, which can save the cost of surfacing.
7.No constrcution waste on site:
All parts of aluminum alloy building formwork system can be reused.
After construction disassembled, there is no garbage on site, and the construction enviromnent is safe, clean and tidy.
8.Standard and versatile:
There are many specifications for aluminum alloy building formwork, which can be assembled according to different specifications of the project.
When the used formwork are rebuilt into new buildings, only 20-30% of non-standard boards can be replaced, which can reduce the cost.
9. High recovery value:
After the aluminum alloy building formwork is scrapped , when the residual value of waste disposal is high, the cost advantage of sharing is obvious (the recovery price per square meter is about 60.00-70.00 USD).